Product: FBE Coating Steel Pipe
Application:  Used for Coal mine,heat and power plant,oil and gas transmission
Size:  OD: 219-2000MM
Packing in bundles, in loose, Nylon Strip for each bundle for piece pipe
Pipe Standard:   DIN30670,CAN/CSA-Z245.21
Color  RAL colors coating powder
Special Service  Sweet Service, Sour Service, Anti-H2S, NACE MR0175/ISO15156
Feature:   anti-chemical corrosion and water resistance strong

Introduction
Fusion bonded epoxy(FBE) coating generally refers to a single layer of fused epoxy coating, using fused epoxy powder coating as a film-forming material. This kind of epoxy powder coating is a kind of thermosetting coating, which is made of solid epoxy resin, curing agent and various additives through mixing and grinding.Fusion bonded epoxy (FBE) coating is a powder coating broadly used to provide protection to pipelines, steel pipes and a wide range of piping bonds.FBE Coating has been used as a standard in industries for protection against corrosion.
FBE coatings have good handling characteristics; they are flexible and resistant to soil pressure.These are used in pipeline projects that have normal requirements and do not have harsh conditions.

Features of Fusion Bonded Epoxy (FBE) coated pipes:
FBE coating is corrosion resistant and chemical resistant
It has high resistance to cathodic disbondment
FBE coating increases the life span of steel pipes providing a constant performance throughout its life span.
The FBE coating has high bond strength and bond firmly to mild steel pipe surface.

Standards of Api 5l Epoxy Primer Coated Pipes
Standard API 5L
Grade PSL-1 API 5L – Gr.B/X42/X46/X52/X60/X70 etc.
( Material) PSL-2 ISO3183 – L245/L290/L320/L360/L415/L485 etc.
Minimum Order Quantity 1 Ton
Outside Diameter Ranges PSL-1 0.405-80(in) or 10.3mm-2032mm
  PSL-2 4 1/2 -80(in) or 114.3mm-2032mm
Wall Thickness Ranges SCH10~SCH160 Or STD,XS,XXS Or 1.73mm~59.54mm
Length For 20Ft Container 4.8m-5.8m
(negotiable) For 40Ft Container 4.8m-12m
  Most common choice 6m, 12m
Type Welded ERW,LSAW/SSAW
  Seamless Cold Drawn,Hot Finished,Hot Expanded
Cap (negotiable) Pipe size should under DN600
Pipe End Plain end All sizes
  Bevel end Pipe size above DN50, and the thickness should greater than 3.2mm
Our advantages ·Diverse products(Steel pipes, pipe fittings, other fittings)
·Any third party inspection is accepted by we company.
·Quick response in quotation,delivery,after-service.
·Focus on pipe & tube solution for project application.



Epoxy Primer Coated Pipes Coating Specification
External Coating
Coating type Coating Standard
3LPE/3LPP DIN30670-1991,CAN/CSA Z245,21-2010,ISO21809-1-2009 SY/T 0413-2002,GB/T23257-2009
2LPE/2LPP SY/T 0315-2002,GB/T23257-2009,ISO21809-1-2009
FBE(Fusion-bond epoxy) SY/T 0315-2005,AWWA C213-2001,CAN/CSAZ245.20-2010,ISO218909-2-2007,API RP5L9-2001
Bitumen coating
 
Enamel &Tape hot-applied		 BS534-1990,AWWA203-2002,AWWA214-2000
Liquid epoxy coating AWWWA C210-2007
Polyurethane insulated coating SY/T0415-1996,CJ/T114-2000.EN253-1994
Internal Coating
Liquid Epoxy Coating AWWAC210-2007
FBE AWWAC213-2001
Cement Mortar Lining BS534-1990,AWWA C205-2001
Bitumen Coating BS534-1990

Epoxy Primer Coated Pipes Technique Data
Technique Data
Moisture Content:   <0.5%
Particle Size:   Larger than 250um<0.2%  Larger than 150um<3.0%
Density:   1.2~1.8g/cm3(Owing to the different formula and different colors)
Recommened Film Thinkness :   a. In FBE systems: 300-400 microns (12-16 mils) b. As a primer in 3-layer PE or PP systems: 150-300 microns (6-12 mils)
Theoretical Coverage:   0.6993 m2/kg per mm (134.6 ft2/lb per mil)
Operating Temperature Range:  "-73ºC (-100ºF) to 110ºC (230ºF)
Storage Time: 12 Months if stored below 27ºC (80ºF) and 65% relative humidity.
 On Sieve: 150μm powder on sieve ≤3%,250μm powder on sieve ≤0.2%
 Gel time:  under 200℃≥12s, and in accordance with manufacturer’s value ±20%
 Thermal properties ΔH≥45J/g,Tg2≥95℃

Our Factory
ERW Steel Pipe
ERW Steel Pipe
 
Packing
There are probably hundreds of different methods for packing a pipe, and most of them have merit, but there are two principles that are vital for any method to work prevent rusting and Sea transportation security. Our packing can meet any needs of the customers.
ERW Steel Pipe
Plastic caps plugged at the two sides of pipe ends
Should be avoided by the steel strapping and transport damage
Bundled signs should be uniform and consistent
The same bundle(batch) of steel pipe should be came from the same furnace.
The steel pipe has the same furnace number, the same steel grade, the same specifications.